PowerBar AT10.sx is a bar equipped with 18 LED RGBW to control the single pixel, where the extension .sx emphasizes this function. Thanks to the new and powerful RGBW Multicolor LED chip technology, PowerBar AT10.sx ensures greater light output, without compromising the brilliant color mixing inside the optics. The specific choice of 20 ° x50 ° optics is ideal for illuminating surfaces that are also located at short distances from the object to be illuminated. The Powerbar AT10.sx chassis is in black painted aluminum. Its liquid crystal display on the back allows you to view and select all functions directly. The DMX data cable is connected and relayed via 5-pole XLR connectors, while the power supply is connected via PowerCon In and Out sockets. Thanks to all these qualities, PowerBar AT10.sx is recommended not only for setting up temporary events, but also for long-term lighting systems.
-
Real-time control for 2,048 parameters in combination with grandMA2 onPC (up to 65,536 parameters as backup in the MA system) Expandable up to 4,096 parameter Command section similar to grandMA2 layout 2 A/B faders (100mm) 1 Level-Wheel Individually backlit - dimmable silent (clickless) keys Integrated universal power supply (90-240V, 50-60Hz) Light (just 6kg), handy & rock solid Ergonomic design Just connect via USB to any PC running grandMA2 onPC -
Technical data:
- LED: 60 W COB with True Color technology
- CRI (colour rendering index): > 92
- Fresnel lens: 120 mm
- Colour temperature: 5600 K or 3200 K
- Light output: equivalent to approximately 650 W tungsten
- Weight: 2.5 kg (5.5 lb)
- Angle of the beam: 15° to 55°
- Dimensions: 190 x 160 x 180 mm (7.5 x 6 x 7 in)
- Mains operation: 90 V — 240 V
- Battery operation: 14.8 V
- Battery connector: 4-pole XLR
- Frequency: 50 Hz — 60 Hz
- Consumption: 60 W
- Dimmer: Intensity control 0% — 100%
- Barndoors: 4 rotating included
- Safety: temperature sensor
- Flicker Free Technology
- Built-in DMX control
- Connectors for DMX in/out: 5-pole XLR
- Instant restrike
- High autonomy with dedicated battery: 2.2 hours
-
Technical data:
- LED: 110 W COB with True Color technology
- CRI (colour rendering index): > 92
- Fresnel lens: 150 mm
- Colour temperature: 5600 K or 3200 K
- Light output: equivalent to approximately 1000 W tungsten
- Weight: 3.5 kg (7.7 lb)
- Angle of the beam: 15° to 55°
- Dimensions: 210 x 260 x 230 mm (8 x 10 x 9 in)
- Mains operation: 90 V — 240 V
- Battery operation: 14.8 V
- Battery connector: 4-pole XLR
- Frequency: 50 Hz — 60 Hz
- Consumption: 110 W
- Dimmer: Intensity control 0% — 100%
- Barndoors: 4 rotating included
- Safety: temperature sensor
- Flicker Free Technology
- Built-in DMX control
- Connectors for DMX in/out: 5-pole XLR
- Instant restrike
- High autonomy with dedicated battery: 1.5 hours
-
The ASTRA 1x1 Bi-Color panel builds on the legacy of the original 1x1 fixture, which revolutionized the lighting industry. This innovative daylight to tungsten tunable color model was years in the making, with every design element of this next generation panel being meticulously crafted. Following the Litepanels tradition of a one square foot form factor, the ASTRA series is designed with select premium quality, high CRI, surface mount LEDs and paired with custom designed TIR optics. These tightly binned LEDs and fine-tuned optics provide the ASTRA 1x1 with superior color reproduction and a light output that is up to four times brighter than traditional LED panels. This higher intensity results in a longer throw and illuminates a wider area, allowing the panel to compete with strong exterior light sources or illuminate a large area effectively with just a single fixture.
-
AR 64 AT 10 offers RGB + Amber color mixing, thus ensuring an even wider color spectrum. The new Y-bracket is not only compact, but also safe for installations in American or floor and the power cord has been replaced by the PowerCon in input and output to allow chain links. Like all Litecraft products, even the PAR 64 AT10 boasts a two-line LCD display, which makes this device easy to use even without the user manual.
-
The Cameo W-DMX™ T1 is a member of Wireless Solution's acclaimed BlackBox series of wireless lighting control transmitters that supports both transmit and receive modes for DMX and RDM signals in the 2.4 GHz frequency band
-
-Fader module for lighting control desk -Real-time control of up to 2048 parameters in combination with grandMA3 onPC -With grandMA3 onPC products and grandMA3 onPC expandable up to 4096 parameters -20 Rotatable RGB backlit encoders -10 Motorised 60 mm faders 40 -Independent playbacks -Individually backlit, dimmable and low-noise (clickless) buttons -Includes dust cover, magnetic labeling strip for 10 faders, 2.0 m power cord with open end and 2 m USB 2.0 cable -Matching case: art. 520330 (not included) Note: a grandMA3 onPC system supports a maximum of 4096 parameters -
MA Lighting introduces a new console: grandMA3 onPC command wing XT. It integrates a PC with MA motherboard, pre-installed grandMA3 onPC software, and as many as 4,096 available parameters! Just add one to four touchscreen monitors and it's ready to go! grandMA3 onPC command wing XT is a lighting console suitable for small and large installations and shows, streaming studios as well as a powerful pre-programming and backup tool on the road. It is built with the same quality standards, in both software and hardware, as those used for the entire grandMA3 product range guaranteeing its MA DNA. grandMA3 onPC command wing XT is the perfect option for new users and MA veterans alike. As a member of the grandMA3 family, onPC command wing XT uses the same user interface as other grandMA3 consoles. Therefore, it allows new users to learn the software and later upgrade without any changes to the larger grandMA3 consoles. In addition, newcomers, will benefit from the free online training courses and MA webinars allowing them to quickly develop their skills. Experienced MA users can maintain their personal working style and rely on this solution wherever it is physically difficult to use a larger grandMA3 console. grandMA3 onPC command wing XT allows you to program, run shows, backup functions, and interact in the grandMA3 world without any limitations. Of course, worldwide, 24/7 MA support is also guaranteed for grandMA3 onPC command wing XT. With 10 motorized faders, 40 physical playbacks, 16 assignable x-keys and a dedicated master fader section, the grandMA3 onPC command wing XT offers a complete playback surface. The grandMA3 onPC command wing XT incorporates the same command section as all grandMA3 consoles making it very easy to use the grandMA3 onPC software. The user has all the inputs and outputs of a grandMA3 console at his or her disposal. DMX, Midi, Ethernet, Timecode, Audio in/out, and Remote Control are all within easy reach on the rear panel. It also has as many as four independent 4K Display port monitor outputs that can be touch. grandMA3 onPC command wing XT has a maximum limit of 4,096 parameters (as with all grandMA3 onPC solutions) deliverable on the 2 DMX ports or the 2 Gigabit Ethernet connectors. The sACN or Art-Net protocols are supported, as well as MA-Net, of course. -
Features:
- Robust Hog 4 Operating Software
- Unlimited number of simultaneous crossfades
- Two internal 15.6-inch wide screen touchscreens with 10 point multi touch
- Two external monitors or touchscreens supported*
- Five encoders for an expanded wheelset
- Twelve LCD User Keys
- Tri Axis backlit trackball, with rotary encoder for the third axis and four configurable buttons for cursor and position control
- Ten motorized playback faders
- One motorized Grand Master
- Four fixed universes of DMX 512 and up to 12 universes of DMX 512 over ArtNet or sACN
- Hog-Net Ethernet connector
- Fixture-Net Ethernet connector
- Internal Solid State Hard disk drive
- Five USB ports for Wholehog wings and external touchscreens
- Desklights, feedback LEDs, and integrated worklight all dimmable
- Auto-ranging mains input (90-250VAC)
-
Unleash your creative vision and bring high-quality cinematic lighting to your set with the compact and lightweight Gemini 1x1 Soft. Delivering the most lighting options ever seen in a 1x1 fixture, control light precisely from a beautiful soft white light to full saturated RGBWW control in an instant; Gemini delivers the ultimate flexibility you need for endless creative lighting options all in one unique fixture. Whether in the studio or out on location, the user-friendly quick-to-rig Gemini 1x1 could be the only panel you’ll ever need. Features: • Front area dimension: 12.6”x12.6” • 95º Beam angle, 157º Field angle • Lux at 10ft/3m: 614 (Daylight), 557 (Tungsten) • Color temperature range 2,700-10,000K • Outstanding color accuracy, CRI: 97, TLCI: 94 • Full RGBWW color gamut mixing • Hue, Saturation and intensity control • Full plus/minus green color correction o – 100% automatic flicker-free dimming at any frame rate or shutter angle • Wired or wireless DMX & Bluetooth remote control options • Multi-voltage 100-240VAC; DC Input 13-28VDC • Optional mobile battery power with 100% intensity output • Weight: 12lbs (5.5kg) -
LED Panel Bicolor for Studio Light and different locations.The LED Panel can practically be used for all video and photo productions and in complex light situations. The Continuously dimmable Color temperature between 3200K en 5600K will deliver the right light quality. Furthermore it has a V-mount (or V-lock) battery adapter for the use on different locations.
Technical Specifications
- Power 65 watt
- Power DC 14,8 V AC 100-240V (met meegeleverde adapter)
- Light output (Lux/1M) ca. 5600 Lux
- Color temperature adjustable between 3200K en 5600K
- CRI >90 Testresultaat 93!
- Continuously dimmable 10 – 100%
- Light Angle: ca. 60º
- Completly delivered with diffusor
- V-mount adapter
- Remotecontrol for all 8 functions and channels. (up to 50 meters)
- Measures: 275 x 275 x 30MM
- Weight 1,95 Kg