Rent Audio Equipment

  • The SE215 is a headset that uses a Dynamic MicroDriver that provides a detailed sound with rich bass. A detachable cable moldable and allows an easy and safe positioning and an adaptation comfortable. The inserts for sound insulation, supplied in various sizes, they provide up to 37 dB of isolation from external noise and allow a perfect adaptation. The SE215 is available in transparent and translucent black versions.

    Features:

    • Headset to sound insulation
    • detailed sound with enhanced bass
    • Dynamic Single MicroDriver
    • Lightweight, low profile with optimized profile to remain comfortably in the ears
    • Robust Kevlar® reinforced cable, detachable, allows an easy replacement
    • moldable cable, with passage over the ears
    • MMCX Gold-plated connector with locking mechanism which allows a rotation of 360 degrees and to find the position most comfortable use.
    • Available in transparent and translucent black versions
  • The HMS-4X HelixNet Main Station provides power and networked channels of audio to support up to 20 digital beltpacks. The sleek 1RU digital system can be mounted into any standard 19" rack. HelixNet Main Stations accept linking as well as two-wire and four-wire optional interface modules, offering seamless connectivity to LAN and virtually all common two-wire and four-wire audio systems. Delivering superb digital sound quality, the two-channel HBP-2X HelixNet Beltpack enables access to 2 of any 24 system channels over a single cable. The rugged, ergonomically designed HelixNet Beltpack was created to perform on the big stage, offering reliability and durability that will withstand the most demanding production environments.

  • Features:

    • Set includes a stationary stereo UHF transmitter, a stereo UHF pocket receiver and mini earphones in a practical transport case
    • Operation in the low-interference UHF band (863-865 MHz) with 16 frequencies selectable
    • Parallel operation of 3 systems is possible without any interference
    • Multifrequency transmitter with UHF pilot tone technology (PLL)
    • Transmits signals to any number of receivers with the same carrier frequency
    • Parallel operation of 3 sets is possible without any interference
    • Further pocket receivers STR-500 can be ordered separately
    • Operation range with line of sight approx. 50 meters
    • License-free and approved in the EU
    • Rubber antenna with BNC connection
    • LCD for mono/stereo mode, stereo signal input and transmission frequency
    • 2 adjustable inputs via balanced combo mounting jacks XLR/6.3 mm
    • Adjustable headphones output
    • Stereo or mono mode
    • Rugged black metal housing with red aluminum front panel
    • Operation via supplied power unit
    • Rack installation (1 U) via mounting set
    • Rack mounting set with antenna cable, BNC plug and BNC socket for one transmitter included in the delivery
    • Adjustable earphones output
    • Balance (left, right) adjustable
    • LCD for battery capacity, receiving frequency, and RF signal
    • High frequency boost selectable
    • Lock function for prevents undesired changes to settings
    • Belt clip
    • Power supply via included 2 x 1.5 V mignon batteries (type AA)
  • Intended for monitoring stereo audio signals in professional applications such as stage or broadcasting, this range consists of a static transmitter and mobile diversity receiver, both built in metal enclosures. The system has a frequency-bank system with up to 16 compatible pre-set frequencies. The bandwidth is 42MHz, offering 1680 tunable UHF frequencies. An HDX compander is used to increase dynamic range, pilot-tone squelch avoids RF interference when the transmitter is turned off. Easy set-up uses the receiver to perform an automatic frequency scan to search for available frequencies. Settings may be transferred between the receiver and transmitter in either direction using infra-red communication. The transmitter may be connected to an Ethernet network for configuration of multi-channel systems using software. Transmitter and receiver are available separately or together as a complete system. Different models are available, in several UHF ranges; each offers 26 frequency banks with up to 16 channels. Each of the channels in the first 20 frequency banks are pre-set at the factory to fixed frequencies. The channels within each bank can be used without intermodulation. The remaining banks allow the user to select and store frequencies.

  • The G4 In-Ear Monitoring Sets make your gig an extraordinary experience – not just for your audience, but also for you! Engineered for professional live sound: Rugged all-in-one wireless monitoring system for in-ear applications. Robust bodypack receiver and reliable in-ear monitoring IE 4 headphones delivering clarity along the whole frequency spectrum for daily use on stage Half-rack stereo transmitter in a full-metal housing with OLED display for full control Easy and flexible wireless synchronization between transmitter and receiver via infrared Compatible with Sennheiser WSM control software for flexible frequency allocation Up to 16 compatible channels Up to 42 MHz bandwidth with 1680 selectable frequencies, fully tunable in a stable UHF range Transmission Range: up to 100 meters / 300 feet High RF output power (up to 50 mW) depending on country regulations
  • DPA’s selection of mics for the drum kit is designed specifically to put the sound engineer in control of the sound. By starting with the clear, true sound of the entire kit, the engineer has the best starting point to shape the sound wanted for the situation. These mics guarantee a natural and precise sound reproduction of the entire kit. The specific mic placements prevent artefacts, bleed and other shadowing effects. The DDK4000 Drum Microphone Kit contains the following mics and accessories: Microphones 1 x 2012 Cardioid Microphone 2 x 2015 Wide Cardioid Microphone (Stereo Pair) 1 x 4055 Kick Drum Microphone 3 x 4099 Core Instrument Microphone, Extreme SPL Accessories 3 x MicroDot Cable (CM2218B00) 3 x Drum Microphone Clip (DC4099) 3 x Adapter for MicroDot to 3-pin XLR (DAD6001)
  • The USB MIDISPORT 1x1 offers a simple, inexpensive solution for when you’re just starting out or only need basic 16-channel MIDI in/out connectivity for your computer. Bus-power makes it easy to take anywhere.

    Features

    • 1-in/1-out MIDI interface
    • 16 discrete MIDI input channels
    • 16 discrete MIDI output channels
    • Bus-powered—requires no external power supply
    • Extremely compact and lightweight for mobile or desktop use
  • MAX is a 2-way full range loudspeaker with remarkable vocal presence, clarity and high feedback stability. Due to its coaxial design it is an extremely compact low height cabinet with two set-up angles. MAX can be used either as a stage monitor, as a downfill in flown applications or together with the C7-SUB as a flexible PA system. The MAX cabinet is constructed from marine plywood, which incorporates the handles, has an impact resistant paint finish and M10 threaded inserts. A socket to accept loudspeaker stands, ratchet strap guide plates and an optional version with MAN CF4 stud plates complete the multiple application options for MAX.

  • The 2-way passive MAX2 loudspeaker houses a 15” LF driver and a coaxially mounted 1.4” HF compression driver and achieves 75° conical constant directivity dispersion. The driver arrangement uses a single magnet assembly, allowing for a compact cabinet design with a low profile for strict visual demands. The MAX2 provides a broad variety of deployment possibilities, whether used individually as a stage monitor; as a stand-alone full range system or, when combined with d&b subwoofers, as a drumfill. The loudspeaker cabinet is constructed in marine plywood with an impact resistant paint finish. Four M10 threaded inserts allow connection to a flying bracket. The cabinet incorporates a pair of recessed grips for handling, while the front is protected by a rigid metal grill backed with an acoustically transparent foam. A pole mount is incorporated into one of the side panels. Two runners recessed in the bottom panel protect the cabinet from scratching and prevents movement.

  • Shure Easyflex EZG and EZG-SE Series microphones are miniature gooseneck-mounted electret condenser microphones designed primarily for speech and vocal pickup. They can be mounted on lecterns, pulpits, or conference tables. All models include a preamplifier and are available with cardioid cartridges. EZG-SE Series microphones can be screwed onto a microphone stand or the supplied 5/8 inch, 27 threaded flange. They can be easily changed from side-exit to bottom-exit to conceal the cable.

    FEATURES

    • Single gooseneck section near microphone base for easy orientation of the microphone.
    • Tubular preamp body sized to fit many standard accessories.
    • Slide on windscreen
  • The Shure MicroFlex MX418 is a fully adjustable cardioid gooseneck microphone designed for podium and desktop use in speech, presentations, conferences and more. The MicroFlex gooseneck microphone series offers the flexibility of removable capsules offering cardioid (included) supercardioid and omnidirectional polar patterns. In addition, the MicroFlex series features high sensitivity and balanced, transformerless output for maximum immunity to electromagnetic hum and RF interference, even over long cable runs.

    • Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
    • Interchangeable cartridges provide the right polar pattern for every application
    • Balanced, transformerless output for increased immunity to noise over long cable runs
    • Shock mount that provides over 20 dB isolation from surface vibration noise
    • Locking flange mount for permanently securing microphone to lecterns, pulpits, or conference tables
  • Wireless version of the Sennheiser and 908 B, without adapter for phantom power, for use with any pocket / instrument wireless evolution transmitter. The e 908 B EW has been designed for saxophones. To microphones trumpets, trombones and flugelhorns, we recommend using the E 908 T EW, which has a lower sensitivity.

    Main features
    • Polar Diagram: Cardioid
    • Transducer: Pre-polarized, condenser
    • Equivalent noise: 30 dB (A)
    • Nominal impedance: 100 Ohm
    • Phantom power supply: 12 - 48V / 3mA
    • SPL Max: 147dB
    • MIA 900 P Phantom Power Adapter not included
    • Connectors: 3.5mm mini jack
    • Dimensions: D47 x 193 mm
    • Weight: 140g

Title