-
PBox 125A (3PH + N + E) / 2 x 63A (3 PH + N + E). 3-phase CEE 125A IN, two 3-phase CEE 63A sockets OUT. Miniature Circuit Breaker (MCB) for general switch. Two Residual Current Circuit Breakers with Overload Protection (RCBO) protect from accidental contacts. In addition: pilot lights for IN voltage (red) and OUT voltage (green) help to keep all Pbox lines well managed. -
63A (3PH+N+E) CEE IN, direct OUT with six 19-pin SSX connectors (standard SOCA) and 2 more 19-pin SSX connectors, mated with twelve single phase 16A CEE sockets. All lines are protected by 6-channel 30mA RCD and MCBs per each channel. In addition: Digital multimeter (DMM) with six 3-digit displays for 3-phase voltage and current control. Red pilot-light for IN voltage, green pilot-light for OUT voltage, helping to keep PBox IN and OUT lines well managed.
-
AR 64 AT 10 offers RGB + Amber color mixing, thus ensuring an even wider color spectrum. The new Y-bracket is not only compact, but also safe for installations in American or floor and the power cord has been replaced by the PowerCon in input and output to allow chain links. Like all Litecraft products, even the PAR 64 AT10 boasts a two-line LCD display, which makes this device easy to use even without the user manual.
-
Technical data:
- LED: 110 W COB with True Color technology
- CRI (colour rendering index): > 92
- Fresnel lens: 150 mm
- Colour temperature: 5600 K or 3200 K
- Light output: equivalent to approximately 1000 W tungsten
- Weight: 3.5 kg (7.7 lb)
- Angle of the beam: 15° to 55°
- Dimensions: 210 x 260 x 230 mm (8 x 10 x 9 in)
- Mains operation: 90 V — 240 V
- Battery operation: 14.8 V
- Battery connector: 4-pole XLR
- Frequency: 50 Hz — 60 Hz
- Consumption: 110 W
- Dimmer: Intensity control 0% — 100%
- Barndoors: 4 rotating included
- Safety: temperature sensor
- Flicker Free Technology
- Built-in DMX control
- Connectors for DMX in/out: 5-pole XLR
- Instant restrike
- High autonomy with dedicated battery: 1.5 hours
-
Technical data:
- LED: 60 W COB with True Color technology
- CRI (colour rendering index): > 92
- Fresnel lens: 120 mm
- Colour temperature: 5600 K or 3200 K
- Light output: equivalent to approximately 650 W tungsten
- Weight: 2.5 kg (5.5 lb)
- Angle of the beam: 15° to 55°
- Dimensions: 190 x 160 x 180 mm (7.5 x 6 x 7 in)
- Mains operation: 90 V — 240 V
- Battery operation: 14.8 V
- Battery connector: 4-pole XLR
- Frequency: 50 Hz — 60 Hz
- Consumption: 60 W
- Dimmer: Intensity control 0% — 100%
- Barndoors: 4 rotating included
- Safety: temperature sensor
- Flicker Free Technology
- Built-in DMX control
- Connectors for DMX in/out: 5-pole XLR
- Instant restrike
- High autonomy with dedicated battery: 2.2 hours
-
The ASTRA 1x1 Bi-Color panel builds on the legacy of the original 1x1 fixture, which revolutionized the lighting industry. This innovative daylight to tungsten tunable color model was years in the making, with every design element of this next generation panel being meticulously crafted. Following the Litepanels tradition of a one square foot form factor, the ASTRA series is designed with select premium quality, high CRI, surface mount LEDs and paired with custom designed TIR optics. These tightly binned LEDs and fine-tuned optics provide the ASTRA 1x1 with superior color reproduction and a light output that is up to four times brighter than traditional LED panels. This higher intensity results in a longer throw and illuminates a wider area, allowing the panel to compete with strong exterior light sources or illuminate a large area effectively with just a single fixture.
-
Technical data:
- Fluorescence tubes: 4 Lupo multiphosphor fluorescent lamps
- CRI (colour rendering index): > 90
- Colour temperature: 5600 K or 3200 K
- Light output: equivalent to approximately 1500 W tungsten
- Weight: 4.2 kg (9 lb)
- Dimensions: 600 x 295 x 50 mm (23 x 11.5 x 2 in)
- Mains operation: 90 V — 240 V
- Frequency: 50Hz — 60 Hz
- Consumption: 220 W
- Dimmer: intensity control 0% — 100%
- Flicker Free Technology
- Filter holder: available as an accessory
- DMX control: optional (integrated in the DMX version)
- Instant restrike
-
Features:
- Robust Hog 4 Operating Software
- Unlimited number of simultaneous crossfades
- Two internal 15.6-inch wide screen touchscreens with 10 point multi touch
- Two external monitors or touchscreens supported*
- Five encoders for an expanded wheelset
- Twelve LCD User Keys
- Tri Axis backlit trackball, with rotary encoder for the third axis and four configurable buttons for cursor and position control
- Ten motorized playback faders
- One motorized Grand Master
- Four fixed universes of DMX 512 and up to 12 universes of DMX 512 over ArtNet or sACN
- Hog-Net Ethernet connector
- Fixture-Net Ethernet connector
- Internal Solid State Hard disk drive
- Five USB ports for Wholehog wings and external touchscreens
- Desklights, feedback LEDs, and integrated worklight all dimmable
- Auto-ranging mains input (90-250VAC)
-
Pilot 3000 is a sophisticated DMX controller ideal for controlling large - small lighting systems. Pilot 3000 can control up to 1024 DMX channels via two independent DMX outputs. Using the Pilot 3000 is simplified by the logical layout of its controls - the use of sophisticated facilities, including: Colour TFT touch screen for direct access to the functions displayed; 4 encoder wheels for controlling the parameters of the Palettes during editing, programming - for assigning values in the program's various screens; 1” Jog Ball for Pan/Tilt. The on-board software - comprehensive connectors enable major communication protocols (DMX 512, MIDI, SMPTE) to be handled. Pilot 3000 is connected to PCs via a USB port. -
Sharpy is a 189W moving beam light with an unprecedented brightness usually achievable only with far greater wattages. Weighing just 16 kg, Sharpy produces a perfectly parallel, laser-like beam with an incredible output of 59,760 lx at 20m (5,100 footcandles at 65 ft). Sharpy is also groundbreaking for the purity of its beam, which is sharply defined and free of any halo or discoloration around the edges. It offers 14 different colors and 17 gobos, allowing you to change the shape of the beam and create an array of spectacular mid-air effects. With its light weight and modest footprint, Sharpy is small enough to be fitted anywhere – on trusses at live and TV events, on stage, in showrooms or conference rooms. Sharpy is also available in a shiny mirror-finish chrome version, adding glamour to sets while making lights a less invasive presence.
-
Brilliant and bright colours come to you with the LED bar. Clubs, bars, shops and stages are the ideal locations for this slender instrument. It is also the perfect device for interesting light creations in your own rooms. LEDs have a high performance, are very bright and shed a strong and intense light. This is naturally also true for the LED bar. Common lamps can be used about 2.000 hours in lighting engineering. This is only a fraction of LED’s longevity, which can bring you approx. 50.000 hours of light. The LEDs in the LED bar consume only little energy. Additionally, they dissipate only little heat. This is not only good for your energy balance, it is also good for the environment.
-
rental n. 40 K & M led lights that can be powered by a battery or power supply