The legendary Neumann sound for the Professional Wireless Range. Full, transparent sound of the award-winning KMS 105, with super-cardioid pickup pattern that delivers superior feedback rejection. The KK 204 and KK 205 capsule heads were developed especially for the Sennheiser SKM 2000 system as well as the Digital 9000 series. Particular importance has been placed on further damping of pop sounds and handling noise, an extremely low level of self-noise, and ease of servicing. Both capsule heads have integrated foam pop protection. The foam pores have a greatly increased surface area and can keep extreme moisture away from the capsule.
-
Compact dynamic cardioid instrument microphone. Transmits high SPLs without distortion. Compatible with toms, snares, and percussion. Clips-on quickly and easily wherever you choose. Tough, reinforced housing, and clamp.
Features
- Rugged reinforced glass-fibre body
- Low sensitivity to impact and handling noise
- Very high sound pressure handling capability
- Low distortion microphone
- Hum compensating coil
- Easy to position due to compact design
- Integral stand mount
-
Professional Speaker Stand Set- Material: Aluminium
- At maximum height can hold up to 30 kg centric load
- Height: 1.25 m - approx. 2.00 m
- Pole diameter: 35mm
- Weight (per piece): 2.16 kg
- Total weight including carry bag (without packaging): 4.73 kg
- Colour: Black
-
The 3 RU two channel D12 amplifier delivers medium to high power into low impedance loads between 4 and 16 ohms and is ideally suited for use in both mobile and installation environments. The D12 contains setups for all d&b loudspeakers and a linear mode. The signal delay capability enables user definable settings of up to 340 msec (=100 m/328.1 ft) to be applied independently to each channel. The same applies to the 4-band parametric equalizer, providing optional boost/cut or notch filtering. The D12 incorporates a digital rotary encoder and a LCD display to configure the amplifier. The D12 utilizes an autosensing switch mode power supply for mains voltages 120 V/230 V, 50 - 60 Hz (optional 100/200V). The D12 amplifier incorporates d&b SenseDrive for accurate control of LF drivers in d&b loudspeakers driven in 2-Way Active mode or in actively driven d&b subwoofers. When the D12 is fitted with EP5 connectors and appropriate 5 wire cabling, d&b SenseDrive can be used, resulting in an extremely precise bass performance even at high levels. NL4 and NL8 connector options are also available. RJ 45 connectors enable access to the Remote network via CAN-Bus. d&b System check verifies that the system performs within a predefined condition, whilst d&b Load monitoring enables an automatic and continuous impedance monitoring. Both can determine the status of an LF or HF driver in systems with multiple elements, even if these are crossed over passively.
-
The 2-way passive MAX2 loudspeaker houses a 15” LF driver and a coaxially mounted 1.4” HF compression driver and achieves 75° conical constant directivity dispersion. The driver arrangement uses a single magnet assembly, allowing for a compact cabinet design with a low profile for strict visual demands. The MAX2 provides a broad variety of deployment possibilities, whether used individually as a stage monitor; as a stand-alone full range system or, when combined with d&b subwoofers, as a drumfill. The loudspeaker cabinet is constructed in marine plywood with an impact resistant paint finish. Four M10 threaded inserts allow connection to a flying bracket. The cabinet incorporates a pair of recessed grips for handling, while the front is protected by a rigid metal grill backed with an acoustically transparent foam. A pole mount is incorporated into one of the side panels. Two runners recessed in the bottom panel protect the cabinet from scratching and prevents movement.
-
MAX is a 2-way full range loudspeaker with remarkable vocal presence, clarity and high feedback stability. Due to its coaxial design it is an extremely compact low height cabinet with two set-up angles. MAX can be used either as a stage monitor, as a downfill in flown applications or together with the C7-SUB as a flexible PA system. The MAX cabinet is constructed from marine plywood, which incorporates the handles, has an impact resistant paint finish and M10 threaded inserts. A socket to accept loudspeaker stands, ratchet strap guide plates and an optional version with MAN CF4 stud plates complete the multiple application options for MAX.
-
Active Compact Loudspeaker- 2x 6,5" Bass + 1" tweeter (full neodymium)
- 120 Watt RMS (Class D amplifier with 24 Bit DSP)
- Max. SPL: 118 dB
- 70 - 20,000 Hz
- Dispersional pattern: 80° x 60°
- XLR/ jack in
- Stereo RCA in
- Soft clip limiter
- Tansport handle AK 50 on option (110949)
- Stand adaptor SN 120/ 130 available on option
- Dimension: 210 x 350 x 270 mm
- Weight: 5 Kg
-
The E6 is a relatively small high performance multipurpose loudspeaker, employing an integrated coaxial driver. The horn with its 100° x 55° dispersion pattern can easily be rotated through 90° providing a 55° x 100° pattern without the use of tools. This enables deployment of the loudspeaker either vertically or horizontally. Its distinctive cabinet design and extensive range of accessories allow easy deployment in almost any situation, including stage monitoring. It provides a very compact reinforcement solution that inspires through its sound quality and is also perfectly compatible with the larger E8 and E12 loudspeakers. With the addition of an E12X subwoofer or any other E-Series subwoofer it can also reproduce high level music program. The E6 cabinet has an impact resistant paint finish incorporating a handle. The loudspeaker cabinet is also available in Special Colour (SC) and Weather Resistant (WR) options. Both options are supplied with a metal plate in the specified colour covering the handle recess.
-
Features
- High gain before feedback
- Very good speech intelligibility
- Outstanding bass reproduction
- Frequency response 40...20.000 Hz
- Sensitivity as per 121 TR 9-5 42 mV/Pa +- 3dB
- Maximum sound pressure level (passiv) 118 dB (k=1%)
- Pick-up pattern cardioid
- Dimensions d=12mm, l=26mm
-
Robust cardioid handheld microphone/transmitter. Fit for every vocal style. Lively, powerful sound. User-friendly menu operation with backlit graphic display. Sturdy metal housing.
Features
- Sturdy metal housing
- 42 MHz bandwidth: 1680 tunable UHF frequencies for interference-free reception
- Enhanced frequency bank system with up to 12 compatible frequencies
- Pilot tone squelch for eliminating RF interference when transmitter is turned off
- Enhanced AF frequency range
- Increased range for audio sensitivity
- Wireless synchronization via infrared interface from receiver
- User-friendly menu operation with more control options
- Illuminated graphic display
- Auto-Lock function avoids accidental changing of settings
- HDX compander for crystal-clear sound
- Battery indicatation in 4 steps, also shown on receiver display
- Exchangeable microphone modules from evolution series
- Contacts for recharging BA 2015 accupack directly in the transmitter
- Wide range of accessories adapts the system to any requirement
-
Super-cardioid microphone/transmitter with impressive sound. Clear, prominent voice reproduction. Highest feedback rejection. User-friendly menu operation with backlit graphic display. Auto-Lock function.
Features
- Sturdy metal housing
- 42 MHz bandwidth: 1680 tunable UHF frequencies for interference-free reception
- Enhanced frequency bank system with up to 32 compatible frequencies
- Pilot tone squelch for eliminating RF interference when transmitter is turned off
- Enhanced AF frequency range
- Increased range for audio sensitivity
- Wireless synchronization via infrared interface from receiver
- User-friendly menu operation with more control options
- Illuminated graphic display
- Auto-Lock function avoids accidental changing of settings
- HDX compander for crystal-clear sound
- Battery indicatation in 4 steps, also shown on receiver display
- Easy-exchangeable microphone modules from evolution series
- Contacts for recharging BA 2015 accupack directly in the transmitter
- Wide range of accessories adapts the system to any requirement
-
High-quality, robust bodypack transmitter with switchable HF output power. Greater choice of usable channels when switched to 10 mW output. User-friendly menu operation with backlit graphic display. Metal housing.
Features
- Sturdy metal housing
- 42 MHz bandwidth: 1680 tunable UHF frequencies for interference-free reception
- Enhanced frequency bank system with up to 32 compatible frequencies
- Pilot tone squelch for eliminating RF interference when transmitter is turned off
- Enhanced AF frequency range
- Increased range for audio sensitivity
- Wireless synchronization of transmitters via infrared interface from receiver
- User-friendly menu operation with more control options
- Illuminated graphic display
- Auto-Lock function avoids accidental changing of settings
- HDX compander for crystal-clear sound
- Transmitter features battery indicatation in 4 steps, also shown on receiver display
- Programmable Mute function
- Contacts for recharging BA 2015 accupack directly in the transmitter
- Wide range of accessories adapts the system to any requirement
-
Features
- Great strengths – small microphone
- Very small dimensions (3.3 mm capsule diameter)
- High maximum sound pressure level (142 dB)
- Very high speech intelligibility; clear, pleasant treble
- Full, natural sound with low ambient noise
- Thin (1 mm diameter) and robust cable; flexible with minimum handling noise
- Very sweat-resistant due to protective membrane
- Flexible tubes for attaching the microphone with clips or adhesive tape
-
Cardioid clip-on microphone. Excellent speech intelligibility. High feedback-rejection. Outstanding bass reproduction.Features
- High gain before feedback
- Very good speech intelligibility
- Outstanding bass reproduction
-
High-quality handheld transmitter. Compatible with all ew capsules. Up to 6 x 64 user-programmable channels. Switchable output power. User-friendly menu operation with backlit graphic display. Rugged metal housing.
Features
- Rugged metal housing
- Up to 75 MHz switching bandwidth
- 20 fixed frequency bands with up to 64 compatible presets
- 6 banks each with up to 64 tunable channels
- Frequency setting in 25 kHz steps
- Pilot tone squelch for interference-free operation
- External charging contacts for recharging battery BA 2015 in the transmitter
- Backlit display on transmitter (keystroke activation)
- Auto-lock feature to prevent buttons from accidently being pressed
- Audio and RF MUTE feature for muting the transmitter
- Transmitters can be configured from the receiver menu
- Possible to synchronize with the receiver using infrared interface
- Wide range of accessories for virtually any use
-
Lightweight, robust bodypack transmitter. AF frequency response optimized for bass guitar. Up to 6 x 64 user-programmable channels. Easy receiver-transmitter synchronization at the push of a button. All-metal housing.
Features
- Sturdy all-metal housing
- Up to 75 MHz switching bandwidth
- 20 fixed frequency banks with up to 64 compatible presets
- 6 banks each with up to 64 tunable channels
- Frequency setting in 25 kHz steps
- Pilot tone squelch for interference-free operation
- External charging contacts for recharging battery BA 2015 in the transmitter
- Backlit display on transmitter (keystroke activation)
- Auto-lock feature to prevent buttons from being pressed accidently
- Audio and RF MUTE feature for muting the transmitter
- Wide range of accessories for virtually any use
- Enhanced audio frequency response in the bass range for optimum transmission from bass guitars
- Input sensitivity above 60 dB can be set in 3 dB steps
- Transmitters can be configured from the receiver menu
- Can be synchronized with the receiver using infrared interface
- Wide range of accessories for virtually any use
-
The MX422 is a four channel, microphone/line mixer with balanced XLR inputs and outputs. The unit is ideal for the broadcast and video markets. It has the same features of other ENG / portable mixers without the extremely high price. Applications include: * DV Field Production. * Electronic News Gathering. * Location Recording (Dialogue and Music). * Digital Recording. * Broadcast Remotes. * Desktop Mixing for Video Post Production. MX422 FIELD MIXER METER RESPONSE: The meters are set at the factory for a 0 indication of a 0 dbv output level. Non responding meters is caused by only one thing, not enough level from the output amp. To correct this please verify the following. Start with the channel and master at center positions. Make sure the monitor switch is out. 1. Turn up the trim control to the point where the meters read the level you desire. 2. If this causes too much output from the output jacks, push in the attenuator button near the output jacks. 3. Fine tune the level you want with the channel and master controls. Finally, if the Pro standard of 0 dB is too hot for you, there are trim pots for each meter inside the unit that can be adjusted down to a 0 indication of about -10dBv.
-
Features:
- Lots of input options at a budget-friendly price
- Channels 1-4 each feature one-knob compression
- 3-band EQ
- 24-bit multi-FX processor
- USB connection for stereo computer recording
-
Features:
- D-PRE mic preamps deliver clean, transparent, and natural sound
- 3-band EQ on all mono channels for sound-shaping
- 1-knob compressors provide straightforward dynamics control
- Pad switch on mono inputs for managing loud sources
- Metal chassis for durability
-
The acclaimed CL series raised live digital mixing console performance to an unprecedented level of refinement with evolved sound quality, operability, and functionality, while maintaining the traditional values that have made Yamaha digital mixers industry standards. Core features and performance inherited directly from the CL series, including natural sound supported by sonically superb internal processing capabilities, operation that easily adapts to the demands of just about any working environment, and built-in Dante networking that facilitates flexible system configuration, have now been condensed and concentrated into the compact QL series digital mixing consoles. QL series consoles offer all-in-one mixing, processing, and routing capability for small to medium scale live sound, corporate speech events, installations, and much more.
-
Midland presents the walkie‐talkie more complete and more powerful range as ever: XT LINE. 7 new models, each featured by new colors! XT LINE comes from over 40 years of experience in the radio communication world, designed to conquer the world market and meet all its needs! Seduced by the innovative packaging and high performance technology. XT line introduces Micro USB charger in the walkie talkie world, the fast charge (in XT60 and XT70), 500 MW speaker (in XT70). On the beach, at a festival or just a keen adventurer enjoying a day out, XT LINE is a great way to keep in touch. Extremely reliable, XT LINE is the ideal solution for those who want to talk in all situations, professional and during leisure time. Our high performance walkie‐talkies are great for extreme sports enthusiasts who need reliable two‐way communications for their adventures. With a range of up to 12kms, these consumer radios are the ultimate accessory for anyone serious about adventure, style and simple communication. XT LINE is ready to use and easy to surf thanks to the keys located on the radio front.
-
The HME DX210 offers the perfect blend of wireless intercom performance, system compatibility with wired intercom systems, and ease of use. Operating in the 2.4GHz band, the DX210 delivers exceptional sound clarity and enables interference-free communication for highly demanding productions. The HME DX210 is a two-channel intercom system that has advanced the capabilities of the legendary DX200. The DX210’s wired intercom interface is now compatible with Clear-Com’s or RTS’ 2-wire systems, and provides two separate 2-wire and 4-wire interconnections. In single channel mode, the powerful 1RU base station supports up to 16 full-duplex and 44 half-duplex beltpacks and/or wireless headsets by linking four base stations. The DX210 is paired with the rugged BP210 beltpack and All-in-One WH220 Wireless Headset, which have two intercom buttons (IC1/IC2) with ISO. The system is also backward compatible with the DX200 COMMUNICATOR models such as BP200, and WH200.
-
Features:
- 2-Channel Headset/Speaker Main Station with built-in 2-amp power supply, rack mount (1RU) - UL Listed
- Compact, feature-laden, single rack-space intercom main station supports up to 40 RS-601 beltpacks, 10 speaker stations or 12 headset stations on two channels.
Other features include:
- Channel A-B linking
- Program input with individual channel level controls
- Remote Mic Kill switch
- External relay circuit
- Stage Announce
-
The LS9 series consoles follow in the distinguished footsteps of the Yamaha PM1D, PM5D, and M7CL, expanding Yamaha's digital mixing console lineup for live sound and installations. The LS9 series consists of the 32-mic/line input 64-channel LS9-32, and the 16-mic/line input 32 channel LS9-16. While being compact and light enough for one person to move and set up easily, both models include features that have been field-proven in previous Yamaha digital consoles as well as outstanding sonic quality. In addition to an extensive range of gating, compression, and equalization capabilities, there's also a built-in USB memory recorder/player for recording or BGM playback, and other functionality that give you everything you need for small to medium scale live sound or installed applications in remarkably compact, all-in-one consoles.
Main Features
- Compact and Lightweight
- Ample Bus Capacity: 16 MIX, 8 MATRIX, and STEREO
- Virtual Rack with Top-quality Effects
- Multiple Fader Functions
- Intuitive Interface
- Recall Safe and Recall Focus...Right Down to Head Amp Gain
- USB Memory Recording and Playback
- LS9 StageMix for iPad®
- LS9 Editor
- Yamaha Console File Converter
- LS9 + Dante I/O Rack System
- LS9 + EtherSound Stage Box System
- LS9 + DSR Speakers