Rent Audio Equipment Archivi - Eventi-x Group Srl

Shure Beta 52

The Shure BETA®52A is a high output dynamic microphone with a tailored frequency response designed specifically for kick drums and other bass instruments. It provides superb attack and "punch", and delivers studio quality sound even at extremely high sound pressure levels. The Beta 52A features a modified supercardioid pattern throughout its frequency range to insure high gain-before-feedback and excellent rejection of unwanted sound. A built in dynamic locking stand adapter with an integral XLR connector simplifies installation, particularly if the microphone is to be placed inside a kick drum. The stand adapter keeps the microphone position fixed and resists slipping, even when subjected to sharp blows and strong vibrations. A hardened steel mesh grille protects the Beta 52A from the abuse and wear associated with touring.

Features

Frequency response shaped specifically for kick drums and bass instruments
Built–in dynamic locking stand adapter with integral XLR connector simplifies setup, especially inside a kick drum
Studio quality performance, even at extremely high sound pressure levels
Supercardioid pattern for high gain before feedback and superior rejection of unwanted noise
Hardened steel mesh grille that resists wear and abuse
Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
Neodymium magnet for high signal–to–noise ratio output
Low sensitivity to varying load impedance
Legendary Shure quality and reliability

Details

Shure Beta 57

The Shure BETA®57A is a high output supercardioid dynamic microphone designed for professional sound reinforcement and project studio recording. It maintains a true supercardioid pattern throughout its frequency range. This insures high gain-before-feedback, maximum isolation from other sound sources, and minimum off–axis tone coloration. Excellent for acoustic and electric instruments as well as for vocals, the extremely versatile Beta 57A dynamic microphone provides optimal warmth and presence. Typical applications include drums, guitar amplifiers, brass, woodwinds and vocals.

Features

Tailored frequency response provides drums, guitars, vocals, and horns with studio quality sound
Uniform supercardioid pattern for high gain-before-feedback and superior rejection of off–axis sound
Hardened steel mesh grille that facilitates use of proximity effect and resists wear and abuse
Neodymium magnet for high signal–to–noise ratio output
Minimally affected by varying load impedance
Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
Legendary Shure quality and reliability

Details

Proel mic switch

Features:

Sensitivity: -40dB ± 2dB / 100ohm ±30%
Output Levels: –
Frequency response: 40Hz -20KHz (-3dB)
Power Supply: Phantom 48Vdc Batteries 3V (2x AA type batteries)
Gooseneck length: 445 mm
Controls: ON/OFF SWITCH
Input/Output Connectors: INPUT: 1x XLR | OUTPUT: 1x XLR
Dimensions (W x H x D): 115 x 140 x 30mm
Weight: 0.7 kg (1.543 lb)

Details

Shure Beta 91A

The Shure BETA®91A is designed for use with kick drums, as well as other traditional low-frequency applications including piano. Featuring an updated microphone capsule, integrated preamplifier, and XLR connection, Beta 91A offers a strong low-frequency response and is specifically tailored for bass frequency applications. The Beta 91A combines superior attack and punch for studio-quality sound, even at extremely high sound pressure levels (SPL).

Features

Uniform half-cardioid polar pattern for maximum gain-before-feedback and rejection of off-axis sound
Precision-engineered low-profile design features integrated preamplifier and XLR connector to maximize setup efficiency while minimizing stage clutter
Frequency response tailored for kick drum/low frequency applications with a wide dynamic range for use in high SPL environments
Two-position contour switch to maximize attack and clarity depending on application: select the flat response setting for natural sound in most applications or the “low-mid scoop” setting for a strong low frequency “punch” with plenty of higher frequency attack
Requires no external mounting or accessories for ease of use and storage
Furnished with zipper pouch

Details

Sennheiser E935

Features

Metal construction: Rugged and reliable
Shock-mounted capsule: Low sensitivity to impact and handling noise
Cardioid pickup pattern: Insulation from other on-stage signals
Hum compensating coil: Reduces electrical interference
Neodymium ferrous magnet with boron: Keeps microphone stable regardless of climate

Details

MIC Microflex Shure MX418

The Shure MicroFlex MX418 is a fully adjustable cardioid gooseneck microphone designed for podium and desktop use in speech, presentations, conferences and more. The MicroFlex gooseneck microphone series offers the flexibility of removable capsules offering cardioid (included) supercardioid and omnidirectional polar patterns. In addition, the MicroFlex series features high sensitivity and balanced, transformerless output for maximum immunity to electromagnetic hum and RF interference, even over long cable runs.

Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
Interchangeable cartridges provide the right polar pattern for every application
Balanced, transformerless output for increased immunity to noise over long cable runs
Shock mount that provides over 20 dB isolation from surface vibration noise
Locking flange mount for permanently securing microphone to lecterns, pulpits, or conference tables

Details

MIC EASYFLEX EZG/18

Shure Easyflex EZG and EZG-SE Series microphones are miniature gooseneck-mounted electret condenser microphones designed primarily for speech and vocal pickup. They can be mounted on lecterns, pulpits, or conference tables. All models include a preamplifier and are available with cardioid cartridges. EZG-SE Series microphones can be screwed onto a microphone stand or the supplied 5/8 inch, 27 threaded flange. They can be easily changed from side-exit to bottom-exit to conceal the cable.

FEATURES

Single gooseneck section near microphone base for easy orientation of the microphone.
Tubular preamp body sized to fit many standard accessories.
Slide on windscreen

Details

Clip violin for DPA 4099

The versatile gooseneck provides stable and repeatable positioning. The mics can be easily unclipped and repositioned or moved to another instrument. The mounting system is designed to never blemish or scratch the finish of your instrument. The flexible design supports a wide variety of mounting and positioning possibilities.

Details

Clip cello for DPA 4099

The versatile gooseneck provides stable and repeatable positioning. The mics can be easily unclipped and repositioned or moved to another instrument. The mounting system is designed to never blemish or scratch the finish of your instrument. The flexible design supports a wide variety of mounting and positioning possibilities.

Details

Clip SAX – TRUMPET for DPA 4099

The versatile gooseneck provides stable and repeatable positioning. The mics can be easily unclipped and repositioned or moved to another instrument. The mounting system is designed to never blemish or scratch your instrument. And you can use any mute together with the microphone clip. It is also easy to place your instrument in a stand with the mic and clip on.

Details

Clip piano for DPA 4099

The versatile magnet mount/gooseneck system provides stable and repeatable positioning.

The mics can easily be positioned at different angles to provide a variety of sound nuances. The mounting system is designed to never blemish or scratch the finish of your instrument. The flexible design supports a wide variety of mounting and positioning possibilities.

The mount can also be used with various instruments with magnetic surfaces.

Details

Sennheiser MZA 900 P

The MZA 900 P phantom power adaptor is used to connect pre-polarized condenser microphones with a 3.5mm jack plug to microphone inputs with 10 - 52 V phantom powering (P12 - P48). The connected microphone is supplied via the adaptor.

The phantom power adaptor is available in two different versions:

MZA 900 P with lockable 3.5 mm jack socket (as evolution wireless)
MZA 900 P-4 with lockable 3-pin special socket

The adaptor is also a quick and flexible solution if a microphone is to be used for both wired and wireless applications. One and the same microphone can be used together with the MZA 900 P(-4) for wired applications (e.g. in the studio) or with a transmitter of the evolution series for wireless applications.

The MZA 900 P can also be used as a cable tester for XLR microphone cables.