Rent Audio Equipment Archivi - Eventi-x Group Srl

Sennheiser SKM 2000

High-quality handheld transmitter. Compatible with all ew capsules. Up to 6 x 64 user-programmable channels. Switchable output power. User-friendly menu operation with backlit graphic display. Rugged metal housing.

Features

Rugged metal housing
Up to 75 MHz switching bandwidth
20 fixed frequency bands with up to 64 compatible presets
6 banks each with up to 64 tunable channels
Frequency setting in 25 kHz steps
Pilot tone squelch for interference-free operation
External charging contacts for recharging battery BA 2015 in the transmitter
Backlit display on transmitter (keystroke activation)
Auto-lock feature to prevent buttons from accidently being pressed
Audio and RF MUTE feature for muting the transmitter
Transmitters can be configured from the receiver menu
Possible to synchronize with the receiver using infrared interface
Wide range of accessories for virtually any use

Details

Sennheiser MKE 40

Cardioid clip-on microphone. Excellent speech intelligibility. High feedback-rejection. Outstanding bass reproduction.

Features

High gain before feedback
Very good speech intelligibility
Outstanding bass reproduction

Details

Sennheiser MKE-1 LEMO

Features

Great strengths – small microphone
Very small dimensions (3.3 mm capsule diameter)
High maximum sound pressure level (142 dB)
Very high speech intelligibility; clear, pleasant treble
Full, natural sound with low ambient noise
Thin (1 mm diameter) and robust cable; flexible with minimum handling noise
Very sweat-resistant due to protective membrane
Flexible tubes for attaching the microphone with clips or adhesive tape

Details

Sennheiser SK 500 G3

High-quality, robust bodypack transmitter with switchable HF output power. Greater choice of usable channels when switched to 10 mW output. User-friendly menu operation with backlit graphic display. Metal housing.

Features

Sturdy metal housing
42 MHz bandwidth: 1680 tunable UHF frequencies for interference-free reception
Enhanced frequency bank system with up to 32 compatible frequencies
Pilot tone squelch for eliminating RF interference when transmitter is turned off
Enhanced AF frequency range
Increased range for audio sensitivity
Wireless synchronization of transmitters via infrared interface from receiver
User-friendly menu operation with more control options
Illuminated graphic display
Auto-Lock function avoids accidental changing of settings
HDX compander for crystal-clear sound
Transmitter features battery indicatation in 4 steps, also shown on receiver display
Programmable Mute function
Contacts for recharging BA 2015 accupack directly in the transmitter
Wide range of accessories adapts the system to any requirement

Details

Sennheiser SKM 500-945 G3

Super-cardioid microphone/transmitter with impressive sound. Clear, prominent voice reproduction. Highest feedback rejection. User-friendly menu operation with backlit graphic display. Auto-Lock function.

Features

Sturdy metal housing
42 MHz bandwidth: 1680 tunable UHF frequencies for interference-free reception
Enhanced frequency bank system with up to 32 compatible frequencies
Pilot tone squelch for eliminating RF interference when transmitter is turned off
Enhanced AF frequency range
Increased range for audio sensitivity
Wireless synchronization via infrared interface from receiver
User-friendly menu operation with more control options
Illuminated graphic display
Auto-Lock function avoids accidental changing of settings
HDX compander for crystal-clear sound
Battery indicatation in 4 steps, also shown on receiver display
Easy-exchangeable microphone modules from evolution series
Contacts for recharging BA 2015 accupack directly in the transmitter
Wide range of accessories adapts the system to any requirement

Details

Sennheiser SKM 100-835 G3

Robust cardioid handheld microphone/transmitter. Fit for every vocal style. Lively, powerful sound. User-friendly menu operation with backlit graphic display. Sturdy metal housing.

Features

Sturdy metal housing
42 MHz bandwidth: 1680 tunable UHF frequencies for interference-free reception
Enhanced frequency bank system with up to 12 compatible frequencies
Pilot tone squelch for eliminating RF interference when transmitter is turned off
Enhanced AF frequency range
Increased range for audio sensitivity
Wireless synchronization via infrared interface from receiver
User-friendly menu operation with more control options
Illuminated graphic display
Auto-Lock function avoids accidental changing of settings
HDX compander for crystal-clear sound
Battery indicatation in 4 steps, also shown on receiver display
Exchangeable microphone modules from evolution series
Contacts for recharging BA 2015 accupack directly in the transmitter
Wide range of accessories adapts the system to any requirement

Details

Sennheiser MKE 40-EW

Features

High gain before feedback
Very good speech intelligibility
Outstanding bass reproduction
Frequency response 40...20.000 Hz
Sensitivity as per 121 TR 9-5 42 mV/Pa +- 3dB
Maximum sound pressure level (passiv) 118 dB (k=1%)
Pick-up pattern cardioid
Dimensions d=12mm, l=26mm

Details

d&b E6 loudspeaker

The E6 is a relatively small high performance multipurpose loudspeaker, employing an integrated coaxial driver. The horn with its 100° x 55° dispersion pattern can easily be rotated through 90° providing a 55° x 100° pattern without the use of tools. This enables deployment of the loudspeaker either vertically or horizontally. Its distinctive cabinet design and extensive range of accessories allow easy deployment in almost any situation, including stage monitoring. It provides a very compact reinforcement solution that inspires through its sound quality and is also perfectly compatible with the larger E8 and E12 loudspeakers. With the addition of an E12X subwoofer or any other E-Series subwoofer it can also reproduce high level music program. The E6 cabinet has an impact resistant paint finish incorporating a handle. The loudspeaker cabinet is also available in Special Colour (SC) and Weather Resistant (WR) options. Both options are supplied with a metal plate in the specified colour covering the handle recess.

Details

dB Technologies K300

Active Compact Loudspeaker

2x 6,5" Bass + 1" tweeter (full neodymium)
120 Watt RMS (Class D amplifier with 24 Bit DSP)
Max. SPL: 118 dB
70 - 20,000 Hz
Dispersional pattern: 80° x 60°
XLR/ jack in
Stereo RCA in
Soft clip limiter
Tansport handle AK 50 on option (110949)
Stand adaptor SN 120/ 130 available on option
Dimension: 210 x 350 x 270 mm
Weight: 5 Kg

Details

MAX monitor

MAX is a 2-way full range loudspeaker with remarkable vocal presence, clarity and high feedback stability. Due to its coaxial design it is an extremely compact low height cabinet with two set-up angles. MAX can be used either as a stage monitor, as a downfill in flown applications or together with the C7-SUB as a flexible PA system. The MAX cabinet is constructed from marine plywood, which incorporates the handles, has an impact resistant paint finish and M10 threaded inserts. A socket to accept loudspeaker stands, ratchet strap guide plates and an optional version with MAN CF4 stud plates complete the multiple application options for MAX.

Details

MAX2 monitor

The 2-way passive MAX2 loudspeaker houses a 15” LF driver and a coaxially mounted 1.4” HF compression driver and achieves 75° conical constant directivity dispersion. The driver arrangement uses a single magnet assembly, allowing for a compact cabinet design with a low profile for strict visual demands. The MAX2 provides a broad variety of deployment possibilities, whether used individually as a stage monitor; as a stand-alone full range system or, when combined with d&b subwoofers, as a drumfill. The loudspeaker cabinet is constructed in marine plywood with an impact resistant paint finish. Four M10 threaded inserts allow connection to a flying bracket. The cabinet incorporates a pair of recessed grips for handling, while the front is protected by a rigid metal grill backed with an acoustically transparent foam. A pole mount is incorporated into one of the side panels. Two runners recessed in the bottom panel protect the cabinet from scratching and prevents movement.

Details

d&b D12 amplifier

The 3 RU two channel D12 amplifier delivers medium to high power into low impedance loads between 4 and 16 ohms and is ideally suited for use in both mobile and installation environments. The D12 contains setups for all d&b loudspeakers and a linear mode. The signal delay capability enables user definable settings of up to 340 msec (=100 m/328.1 ft) to be applied independently to each channel. The same applies to the 4-band parametric equalizer, providing optional boost/cut or notch filtering. The D12 incorporates a digital rotary encoder and a LCD display to configure the amplifier. The D12 utilizes an autosensing switch mode power supply for mains voltages 120 V/230 V, 50 - 60 Hz (optional 100/200V). The D12 amplifier incorporates d&b SenseDrive for accurate control of LF drivers in d&b loudspeakers driven in 2-Way Active mode or in actively driven d&b subwoofers. When the D12 is fitted with EP5 connectors and appropriate 5 wire cabling, d&b SenseDrive can be used, resulting in an extremely precise bass performance even at high levels. NL4 and NL8 connector options are also available. RJ 45 connectors enable access to the Remote network via CAN-Bus. d&b System check verifies that the system performs within a predefined condition, whilst d&b Load monitoring enables an automatic and continuous impedance monitoring. Both can determine the status of an LF or HF driver in systems with multiple elements, even if these are crossed over passively.

Details

Speaker Tripod Stands DJ disco

Professional Speaker Stand Set

Material: Aluminium
At maximum height can hold up to 30 kg centric load
Height: 1.25 m - approx. 2.00 m
Pole diameter: 35mm
Weight (per piece): 2.16 kg
Total weight including carry bag (without packaging): 4.73 kg
Colour: Black

Details

SENNHEISER e604

Compact dynamic cardioid instrument microphone. Transmits high SPLs without distortion. Compatible with toms, snares, and percussion. Clips-on quickly and easily wherever you choose. Tough, reinforced housing, and clamp.

Features

Rugged reinforced glass-fibre body
Low sensitivity to impact and handling noise
Very high sound pressure handling capability
Low distortion microphone
Hum compensating coil
Easy to position due to compact design
Integral stand mount

Details

NEUMAN KK205

The legendary Neumann sound for the Professional Wireless Range. Full, transparent sound of the award-winning KMS 105, with super-cardioid pickup pattern that delivers superior feedback rejection. The KK 204 and KK 205 capsule heads were developed especially for the Sennheiser SKM 2000 system as well as the Digital 9000 series. Particular importance has been placed on further damping of pop sounds and handling noise, an extremely low level of self-noise, and ease of servicing. Both capsule heads have integrated foam pop protection. The foam pores have a greatly increased surface area and can keep extreme moisture away from the capsule.

Details

Neumann KM 184

Without any doubt, you must have heard the KM 184 in various recordings, as it is the go-to instrument microphone in countless studios around the globe

FEATURES

Versatile small membrane microphone primarily for instrumental recordings
Slight treble lift for fresh and vivid sound
Precise cardioid directionality with excellent rejection of rearward sound
Uncolored reproduction of neighboring sound sources
Tight production tolerances – perfect for stereo recordings

Details

Sennheiser MD 421 II

Extremely versatile, robust legendary cardioid microphone. Easy handling due to pronounced directivity. Clear sound reproduction. For most recording conditions and broadcasting applications. Five-position bass control.

Features

Rugged professional microphone
Five position bass roll-off switch
Effective feedback rejection
Clear sound reproduction
Easy handling due to pronounced directivity

Details

DI box BSS AR-133

The unit includes phantom power and battery supplies as standard. Should the phantom power from the console fail or be accidentally switched off, the AR-133 automatically switches over to the internal 9V battery providing uninterrupted use. The unit is housed in a rugged aluminium extrusion case, with robust polyurethane end-cheeks which give the AR-133 a very distinctive look. Input connectors are both 1/4" jack sockets and an XLR socket, the latter meaning that the AR-133 can be used to convert unbalanced signals to a balanced output on XLRs throughout. The arched case allows cables to run back underneath the unit from the end for neat cable management. Input attenuation is 0, -20 or -40dB, making the box suitable for instrument, line or amplifier levels on inputs. On the output side, a ground-lift switch is provided for quick solutions to ground-loop problems. The AR-133 uses an enhanced version of the same audio path as the AR-116, now regarded by many people as a reference standard. The sound quality is legendary, particularly on acoustic and bass guitars. Numerous applications can be satisfied by the AR-133. For example, as well as the traditional guitar use, the AR-133 can be used with keyboards, DJ consoles, amplifier outputs, and other electronic sources. An additional bonus is the ability to use the AR-133 as an active balancing device.

Details

DI Behringer

High-Performance Passive DI-Box

Professional and multi-purpose direct injection box for stage and studio applications
Provides impedance and signal matching for the direct connection of instruments to mixers and amplifiers
Ultra-flat frequency response due to renowned BEHRINGER OT-2 transformer
Allows direct connection to speaker outputs with up to 3,000 Watts
Ground Lift switch eliminates typical ground loop problems
Filter switch reduces annoying hiss and buzz
Thru/Out jack lets you send the unbalanced signal to an onstage amplifier while the balanced signal is routed to the mixer
¼" TRS and gold-plated XLR connectors
Ultra-rugged, road-suitable metal case
High-quality components and exceptionally rugged construction ensure long life and durability

Details

DI Box

is a compact adapter that plugs into a laptop computer speaker jack, changes the output to a balanced mono mic-level signal and mates with standard XLR audio cable for connections to a house audio system. A ground lift switch assures a hum-free interface. On-board volume control.

Details

DI-BOX PASSIVE PALMER

Palmer PLI 04, passive 2-channel DI-Box, 2x jack plug in, 2x RCA in, 1x 3,5 mm stereo-plug in, thomann 2x XLR balanced out, especially for Hifi and computer

Details

Behringer MX882 ULTRALINK PRO 8-Channel Splitter/Mixer

The MX882 multi-function audio signal router features 6 inputs and outputs which allowing dual usage as a mixer or signal splitter. The signal splitter function allows users to route incoming audio signal, via the main stereo inputs, to any of the available 6 outputs. Servo-balanced, gold-plated XLR and 1/4" TRS inputs and outputs assure quiet, high-quality audio signal. You can use the MX882 as a DI-Box, or as a multi-channel line matching transformer. Every channel features comprehensive 8-segment metering of input gain, with 4-segment metering provided on main in and main output channels

Details

M-AUDIO MIDI 1×1

The USB MIDISPORT 1x1 offers a simple, inexpensive solution for when you’re just starting out or only need basic 16-channel MIDI in/out connectivity for your computer. Bus-power makes it easy to take anywhere.

Features

1-in/1-out MIDI interface
16 discrete MIDI input channels
16 discrete MIDI output channels
Bus-powered—requires no external power supply
Extremely compact and lightweight for mobile or desktop use

Details

Roland acoustic drum trigger rt-30

With exceptional trigger sensitivity, ultra-quick installation, and compatibility with the latest drum hardware, the streamlined RT-30 series sets a new standard for anyone wanting to explore hybrid drumming. Ideal for use on snare drums, the RT-30HR supports independent head and rim triggering for playing two different sounds from the same drum. The RT-30HR also incorporates a newly developed self-guided mount that automatically sets the sensor in the optimum position against the drumhead, with no fussy mechanical adjustment needed after mounting.

Feature:

Advanced dual-trigger device with independent head and rim triggering for playing electronic sources from acoustic drums
Compatible with Roland’s TM-2 Trigger Module, TD-series V-Drums sound modules, and SPD-series percussion pads
Installs on nearly any metal drum hoop, including the latest inward-curved hoop styles
Newly developed self-guided mount makes installation quick and easy
10 mm lower in profile than previous designs for increased playing comfort
Durable fiberglass-reinforced ABS body and secure mounting mechanism for dependable operation
Side-mounted trigger output jack for improved cable management
TRS connection cable included

Details