Professional Audio Equipment rental for any conference, convention and high quality corporate event
-
The QL series mixers offer mixing, processing and routing functions for small and medium-sized live performances, corporate events, installations and much more. -
- Live performance digital console control centre with up to 88 simultaneous input channels
- 35 time-aligned and phase-coherent mix buses
- HyperMAC and AES50 networking allows up to 288 inputs and 294 outputs @ 96 kHz Sample Rate
- Touring grade road case featuring marine grade plywood, aluminium extrusions and composite density protective foam
- HyperMAC router with 192 bidirectional channels over copper and optical fibre
- Provides dual redundant snake connection to DL371PRO9 Audio System Engine
- Snake connections up to 500 m with optical fibre or 100 m with CAT5/5e cable
- 10 VCA (variable control association) and 6 POPulation groups
- Up to 36 assignable 1/3 octave KLARK TEKNIK DN370 graphic equalisers
- Up to 8 multi-channel digital signal processing effects engines
- 29 MIDAS PRO motorised 100 mm faders
- 2 daylight viewable 15” full colour TFT display screens
- Fully interpolated touch sensitive controls
-
Digital Mixing System
- 64 Channels x 27 Buses
- 28 motorised faders: 3x 8, 1x 4
- Equipped with 8 mic/line inputs
- 16 Analog outputs
- 2 AES inputs
- 3 AES outputs
- Weight: 46 kg
-
The Yamaha CL series digital mixers represent a new level of refinement. They offer an advanced experience for simplicity of mixing, with in addition a purity and a capacity to shape the sound that will give every sound engineer unprecedented creative freedom. The CL series embodies the main standards of live sound in their most advanced and expressive form. The "virtual racks" available on the CL series consoles allows you to combine the signal processors needed for your work in a unique and easily accessible location, much like the traditional analog outboard racks. Efficiency and intuitiveness are essential. Yamaha's acclaimed Centralogic interface is the core of a revamped user interface that offers an unprecedented level of operational efficiency in the CL series, from visual feedback to the shape and tactile feel of faders and controls. The Yamaha Centralogic user interface has already demonstrated its value as the most user-friendly among the available digital operating environments, even for those engineers who were previously only at ease on analogue consoles..
-
Features:- Band: E-Band Frequency range: 823 - 865MHz
- Apex angle: approx. 100° Front-to-back
- ratio: > 14 dB
- Gain: typ. 10 dB
- Dimensions: 258 x 273 x 35 mm
- Weight: 350g
-
The Opus Drumsets offer high-performance drum microphones from the Opus range at favourable prices. Four sets are available as individually customised sets. The sets include a rugged transport case with foam inlay which can be equipped with one Opus 99 (Bass Drum), one ST 99 (stand for Opus 99), three Opus 53 or MC 930 (Overhead, HiHat, Cymbals) and up to four Opus 88 (Snare Drum, Toms) and four Opus 87 resp. Opus 67 microphones (Toms) at maximum. Microphones clamps are included.
Drum Mic Set
Set comprises:
- 1x Bass drum Boundary microphone TG D71
- 2x Condenser microphones D57c for Tom Toms (cardioid, Clip-On)
- 3x Condenser Microphones D58c for Snare/Tom Toms (cardioid, Clip-On)
- 2x Condenser microphones MC 930 for overhead (cardioid)
- 1 Condenser microphone MC 950 for Hi-hat (super-cardioid)
- Solid M Bag Drum Softbag with protective foam insert and space for additional microphones and accessories
- Microphone clips
-
Audio rental d&b audiotechnik Big Kit composed of: N.20 Q1 d & b audiotechnik N.4 Q7 d & b audiotechnik N.12 QSub d & b audiotechnik N.1 Yamaha M7CL mixer. Design and configuration assistance -
The 3 RU two channel D12 amplifier delivers medium to high power into low impedance loads between 4 and 16 ohms and is ideally suited for use in both mobile and installation environments. The D12 contains setups for all d&b loudspeakers and a linear mode. The signal delay capability enables user definable settings of up to 340 msec (=100 m/328.1 ft) to be applied independently to each channel. The same applies to the 4-band parametric equalizer, providing optional boost/cut or notch filtering. The D12 incorporates a digital rotary encoder and a LCD display to configure the amplifier.
-
Rental Audio kit d & b audiotechnik composed by: N.6 d & b Q1 N.2 d & b Q7 No. 6 d & b QSub N.4 d & b D12 N.1 Yamaha LS9 mixer Design and configuration assistance -
J-SUB is a bi-amplified 2-way bass-reflex subwoofer incorporating three 18 "long-excursion neodymium speakers, two of which are mounted on the front panel and one on the rear panel. which derives from this architecture avoids the unwanted projection of energy behind the system, which thus benefits from a considerable reduction of the reverberated field at the serious frequencies and therefore translates into an incomparable reproduction precision.The J-SUB systems can be used to complement the J8 and J12 systems in various combinations, either on the ground or suspended, either integrated into the column at the top of the J8 / J12 array, or in independent J-SUB columns. built in marine plywood covered with the exclusive PCP (Polyurea Cabinet Protection) treatment to protect against shocks and atmospheric agents.The front and back panels are protected by a rigid metal grid ca, while on each side panel there are four handles. Four 100mm wheels and an EP5 or NL8 connector complete the rear panel.
-
The E12 and E12-D are high performance 2-way multipurpose loudspeakers, employing an integrated coaxial driver. The E12 and E12-D can be used for speech and music applications as stand-alone full range systems or incorporated into larger distributed sound reinforcement situations and, with the addition of an E15X or B4 subwoofer, can also easily reproduce high level music program. The multifaceted shape of the enclosure allows use either in an upright or horizontal orientation as well as deployment as a stage monitor. The E12 has an 80° x 50° dispersion pattern (h x v), while the E12-D has a wider 110° x 50° pattern. The horns in both loudspeakers are easily rotatable through 90° providing 50° x 80° or 50° x 110° dispersion patterns. The E12 and E12-D cabinet is constructed from polyurethane integral hard foam with an impact resistant paint finish incorporating handles and a hidden socket to accept loudspeaker stands. The loudspeaker cabinet is also available in Special Colour (SC) and Weather Resistant (WR) options. Both options are supplied with metal plates in the specified colour covering the handle recesses and loudspeaker stand socket.
-
The Q-SUB is an actively driven low compression bass-reflex loudspeaker fitted with a high excursion 18" driver. d&b SenseDrive technology is available when powered by the D12 amplifier. The Q-SUB is mechanically compatible with the Q1 and Q7; ten sockets in the front grill and side panels for Q-Series rigging components permit use in various combinations, either flown or ground stacked. The Q-SUB cabinet is constructed from marine plywood with an impact resistant paint finish, a pair of handles, four heavy duty wheels and an M20 threaded flange in the top panel to accept a loudspeaker stand. The front of the loudspeaker cabinet is protected by a rigid metal grill covered with replaceable acoustically transparent foam and two EP5 or NL4 connectors wired in parallel are mounted on the rear panel. Two runners protect the bottom of the cabinet from scratching; these are located in correspondingly shaped recesses in the top panel to prevent movement when stacked. Fittings for securing an optional wooden lid are also provided.